DAP2040III Professional Digital Speaker Management

Input channels and sockets

2 XLR Female sockets

2 XLR Female sockets

4 XLR Female sockets

4 XLR Female sockets

Output channels and sockets

4 XLR Female sockets

6 XLR Female sockets

6 XLR Female sockets

8 XLR Female sockets

Input Impedance

Balanced 20 KΩ

Output impedance

Balanced 100 Ω

PC-interface

One USB interface, one RS485 interface, one LAN interface

KCMR

＞70dB（1KHz）

Input Range

≥17dBu

Frequency Response

20Hz-20KHz (0~-0.5dB)

S/N R

＞110dB

THD

＜0.01%     （Output=0dBμ/ 1KHz）

Crosstalk of Channels

＞80dB(1KHz)

DANTE

4 in 8 out. Each path in Dante output can be selected along any of the output channels

Input Channels  

Mute

Each channel can be set independently.

Delay

Each input channel has independent delay control, the delay value is 0-1000ms, three units of M\Ft\Ms are optional, and there are 5 kinds of step distance x0.001\x0.01\x1\x10

Polarity

In Phase (+) & Reversed Phase (-)

EQ

Every input channel has 10 bands PEQ and 31 bands GEQ. When adjusted the parameters in the PEQ state, the central frequency point was 20Hz-20KHz, step: 1Hz. When the type(T) is selected as Parm, the Q value is 0.404-28.9, and the gain is -20dB-12dB, the stepis 0.1dB. When the type (T) is selected as LP2/HP2, Q value and the gain are not adjustable. When the type (T) is selected as LShf /HShf, Q value is not adjustable. The gain is -20dB~12dB, the step is 0.1 dB. When the type (T) is selected as APF1, Q value and the gain are not adjustable. When the type (T) is selected as APF2, the gain is not adjustable. Q value is 0.404~28.9.

Output Channels

Mute

Each channel can be set independently.

Selection

Each output channel can be individually selected for a different input channel or any combination of input channels

Gain

Adjust Range: -48dB to +12dB, Step: 0.1dB 

Delay

Each input channel has independent delay control, the delay value is 0-1000ms, three units of M\Ft\Ms are optional, and there are 5 kinds of step distance x0.001\x0.01\x1\x10

Polarity

In Phase (+) & Reversed Phase (-)

EQ

10 bands PEQ, When adjusted the parameters in the PEQ state, the central frequency point was 20Hz-20KHz, step: 1Hz. When the type (T) is selected as Parm, the Q value s 0.404-28.9, and the gain is -20dB-12dB, the step is 0.1dB. When the type (T) is selected as LP2/HP2, Q value and the gain are not adjustable. When the type (T) is selected as LShf/HShf, Q value is not adjustable. The gain is -20dB-12dB, the step is0.1 dB. When the type (T) is selected as APF1, Q value and the gain are not adjustable. When the type (T) is selected as APF2, the gain is not adjustable. Q value is 0.404-28.9.

X-over

Each output channel has llR and FIR two types of frequency divider filters, which can be selected as : Bessel ,Butterworth, Linkwitz-Riley; Frequency selection: 20Hz-20KHz.Where damping rate of Bessel, Butterworth are 12dB/oct,18dB/oct,24dB/oct,36 B/oct,48dB/oct, damping rate of Linkwitz-Riley are 12dB/ct, 18dB/oct,24dB/oct, 48dB/ oct

Compressor

Each output channel can set an independent Compressor, parameters can be adjusted as: threshold value -6dbu-+12dbu, step pitch 0.1dbu, starting time:3ms-100ms,step pitch 1ms. Release time can be adjusted to 2,4,6,8, 16,32 times starting time.

Processor

96KHz sampling frequency, 32 bit floating,24 bit A/D or D/A converter

LCD Screen

2*24 LCD blue backlight display Settings, 8-segment LED input/output precise digital level meter, mute and edit status

RMS

≤30W

Power

AC 90/240V 50Hz/60Hz

Weight

1 PCS: 4.1/5KG

Package Dimensions(W*H*D)

536×410×80mm