Papua New Guinea DL16 Digital Snake/Stage Box

Product Description

DL16 Digital Snake

 

I. Features:

▼Equipped with 16 analog balanced input interfaces and 8 analog balanced output interfaces.

Additionally features 4 AES/EBU output channels.

Includes two AES67 communication network ports.

16 XLR input channels with 8-level sensitivity adjustment capability.

Input channels support: 48V phantom power switch, analog gain/digital gain adjustment, phase control, 0-1000ms delay, panning/ balancing, volume control, and customizable channel labels, 5-band parametric equalization (parametric equalization / high-pass / low-pass selectable), high-pass, low-pass, full-pass

filters, noise gate, compressor, and other functions (specific features depend on the configured main control console).

The output channel supports 0-1000ms delay, panning/ balancing, volume control, customizable channel labels, 6-band parametric equalization (with optional          parametric, high-pass, or low-pass modes),high-pass filter, low-pass filter, 31 -band GEQ, compressor, and other features (specific functions depend on the configured master console).

Three-position switch with three green LEDs for assigning a unique ID (1-3) to the interface box.

Powered by PT40 switching power supply module (AC100-240V/50/60Hz), featuring front panel power switch control and indicator lights.

Compatible with master mixing consoles via AES67 protocol communication.

Interface box operation controlled through master mixing console.

 

II. Front & Rear Panel Instructions

Front Panel

 

1.Communication Indicator Lights:

1) Device operating status indicator.

2) Device communication status indicator.

2. MUTE Button: Mute all channels.

3. Power Indicator Light: Indicates device power-on status.

4. Output Channel Interfaces: OUT1-8 balanced output channels.

5. Input Channel Interfaces: IN1-16 balanced input channels with 48V phantom power switch and indicator light.

 

Rear Panel

1. Power source: Device power input and power switch.

2. ID Dialing Switch: A device ID dialing configuration switch.

3. AES interfaces: AES output interfaces OUT5-6 and OUT7-8.

4. USB interfaces: Dedicated USB interface for device upgrades.

5. AES67 interface: The device's AES67 interface.

 

III. Technical parameters

Input

Input Impedance

5KΩ (unbalanced), 10KΩ (balanced)

Frequency Response

20Hz-22kHz (+/-1dB)

Maximum Input Level

+22dBu

Distortion Factor

<0.003%

Phantom Power

+48V (CH-1 to CH-16)

S/N Ratio

-113dB

Phase Difference

0.01

Channel Separation

114dB

Delay

1000ms (Determined by the main console)

Dynamic Range

112dB

Output

Output Impedance

100Ω

Maximum Output Level

+22dBu 

Noise Floor

-88dBu

Hardware

Power Supply

100-240V (50/60Hz)

Power Consumption

≤35W

Dimensions (DxWxH)

(Device) 482x285x90mm

(Encasement)595x445x170mm

Weight

Net Weight: 3.9kg

Gross Weight: 5.48kg

Accessories

Power cord